Double Head Textile And Garment Industrial Conveyor Belt Broken
Needle Metal Detector 220 v , 50 Hz
The Needle Detector is an ordinary needle detector designed with
anti-jamming digital circuit and magnetic induction principle. It
is mainly used to detect ferromagnetic metals such as needles and
iron filings in textile products. Can effectively eliminate:
electromagnetic waves such as ceiling fans, sewing machines,
sealing machines.
Applicable places:
Check broken needles: women's wear, men's wear, student uniforms,
overalls, baby products, knitwear, underwear, socks, fabrics,
non-woven fabrics, embroidery, towels, bath towels, carpets,
gloves, toys, handicrafts, etc. .
Through the inspection needle: hardware button, metal zipper,
Japanese word buckle, bead chain, brooch and other clothing
handbags metal accessories over the needle machine.
| Technical Parameter:(Can custom) |
| Detection width | Detection height | Detection standard | Conveying speed | Power Supply | Power | Weight | Volume (L×W×H) |
| 600mm | 120mm
150mm
200mm | Feø≥1.0mm
Feø≥1.2mm
Feø≥1.5mm | 25~30
m/min | 220V | 100W | 180KG
---
200KG | 1650×960×900
(mm) |
| Description | The sensitivity is determined by the detection height (ie channel
or gantry) to determine the highest detection accuracy. The higher
the gantry, the lower the sensitivity. The above corresponding
height and detection standard are the detection results in the
empty machine state; the detection channel height and width can be
customized according to requirements! |
Features:
1. High sensitivity. diameter of 1.0mm are detected. The nine-point
test method does not miss the inspection.
2. All steel frame is beautifully painted body, the whole machine
is strong, and it is more beautiful, anti-impact and
anti-weak magnetic resonance than traditional aluminum sheet wings;
suitable for docking assembly line operation.
3, super anti-interference computer chip integrated circuit,
dual-channel sensor, equivalent to the traditional double-
probe needle detector;
4. All function keys are light touch type membrane switches, which
avoids the shortcomings of mechanical buttons
being easily damaged;
5. There is a position display function, and the eight-point part
shows the exact broken needle position function;
6, with a counting function, distinguish between good and bad
products (qualified, total, detected);
7. The alarm function is three kinds of sound, light and stop
machine. The sensitivity is adjusted from 1 to 10 levels;
8, special protection circuit, no object to pass through the
automatic shutdown for 10 minutes;
9. All function settings are completed after the main power is
turned on, without starting the motor;
10, with B / C (accessory / finished product) mode switching
function, to adapt to the needle inspection of different
products;
11. When the broken needle or iron object is detected, the sound
and light alarm modes are stopped, and the machine returns to the
starting point and automatically runs aga
in.
